Our recent move was the perfect time to toss our super old mattress and upgrade to a King sized bed (which has been on my wish list for years)! We got a great deal on a foam mattress on Overstock and we even had a bed frame that converts from a Queen to King we were able to use. But I felt like it looked sloppy without a headboard. This is how it looked before…
We didn’t want to spend a ton of money and every King sized headboard we found was $400+. So I just kind of sat on the whole idea for a few days and then decided I wanted to turn a door into a headboard. I also wanted reading lamps mounted to the headboard. We measured the bed to know what size door we’d need and then went “door-hunting” locally at an awesome store called Prattville Pickers (with a tape measure in tow!). Since shopping with 3 kids in antique and “pickers” type stores is less than fun, my husband texted me pictures of the doors he found. I turned down a bunch and then he sent this one and I knew it was the one! Door cost: $60.
Creating the Headboard
We sanded the door down a bit, cleaned it up, and distressed the white side even more. I really wanted to keep the door knob but it would have meant keeping the bed too far away from the wall, so we removed the knob but left the plate.
My husband measured the bed frame to determine how tall to make the legs and how far apart to space them. Then he secured the legs to the door (using 1×6 lumber) and used heavy duty screws and bolts to attach the headboard to the bed frame.
Lumber & Supply Cost: Around $20
The door is really heavy and solid so it took two of us to install.
Converting the Sconces to Plug-Ins Lamps
The lamps were trickier than the headboard because lightening tends to be expensive, especially the vintage-style barn lamps. Most of the ones I found were $300..each! It’s also hard to find plug-in style sconces.
So we ventured over to Lowe’s and found these Allen + Roth Barn Light Sconces for just under $35 each! We talked to one of the Lowe’s employees about converting it ourselves and learned it was super easy (and inexpensive) to do.
To convert the sconces to plug-in lamps you’ll need:
- Wire cutters
- Wire connectors
- Electrical Tape
- Needle-Nose Pliers
- (2) Base Switch Cords (The base switch cords have the on/off button on the cord so you can turn your light off/on without having to plug/un-plug)
- Two vintage style light bulbs (optional)
I was going to have my husband write up this part of the tutorial on how to do the actual light conversion but I Googled it and found this excellent post with a ton of pictures on The Happy Housie. This is the exact method he used.
Then he drilled a hole (1″) into the bed corners to pull the wire through so we could mount the lights. (And then it turned out the plug wouldn’t quite fit through the hole so he just disconnect the wires, pulled the wires through, and then re-connected them to the scone wires as in the method above.)
Finally, we screwed the lamps into the headboard, added the shades (included in the box but it was not put together), and put in the pretty bulbs. And now we can easily use the button on the cord to turn on our reading lamps.
I think the bedroom looks so much more complete now!
I was about to take the photo and realized the same needed some quick wall art, so I used my Silhouette CAMEO* and cut this hand-lettered Jenny Highsmith phrase out of white vinyl*. I added a frame I painted a while back.
A rundown of the bedding sources:
- Sheets: Costco (they were actually really cheap and they’re SO soft!)
- Shams: West Elm (These are queen sized from our former bedding set)
- Navy Pillow and Bedspread: Kohl’s (clearance find!)
- Hello Pretty Pillow: Target
Total time investment: 2-3 hours
Total Cost: Under $150
*Denotes Amazon affiliate link.